Pillow Block Units

Pillow Block Units
Pillow Block Units

Pillow block units are a type of bearing that is used to support a rotating shaft. They consist of two halves, one fixed and one movable, which are joined together by means of an internal keyway or splines. The pillow block unit can be made from several different materials including cast iron, steel or bronze.

The key advantage of pillow block units is that they provide a secure and stable mounting point for rotating shafts, reducing the risk of misalignment and increasing the lifespan of the bearing. Pillow block units are commonly used in industries such as mining, agriculture, construction, and manufacturing, among others.

Types of Pillow Blok Units

Pillow Block Units Types
Pillow Block Units Types

Pillow block units, also known as plummer blocks, are a type of bearing housing that are commonly used in industrial applications. There are several pillow block units types, including:

  • Split pillow block units: These units are split into two separate halves that are bolted together. This makes it easier to install and replace the bearing.
  • Solid pillow block units: These units are made from a single piece of metal and are typically used in heavy-duty applications.
  • Flange pillow block units: These units have a flange that is used to mount the unit to a surface. They are commonly used in applications where the unit needs to be bolted to a surface.
  • Hanger pillow block units: These units have a hanger that is used to suspend the unit from a surface. They are commonly used in applications where the unit needs to be suspended from an overhead structure.
  • Take-up pillow block units: These units are used to adjust the tension of a belt or chain drive. They have a threaded rod that is used to move the unit back and forth to adjust the tension.
  • Stainless steel pillow block units: These units are made from stainless steel and are commonly used in applications where corrosion resistance is important, such as in the food and beverage industry.

Each type of pillow block unit has its own unique features and benefits, and the choice of unit will depend on the specific application and requirements.

Installation of Pillow Block Units

Pillow Block Units Installation
Pillow Block Units Installation

Installing pillow block units is a fairly straightforward process, but there are some important steps to take to ensure that your installation goes smoothly. Here’s what you need to know:

  • You’ll need the right tools for the job. A variety of different tools are available for installing pillow blocks, including wrenches and sockets. Make sure you have these on hand before starting work!
  • Be sure not to overtighten bolts or other fasteners while installing your new unit; this could cause damage or failure of parts over time. It’s best if they’re snug but not tight enough that they’re difficult to turn by hand afterward without using force greater than necessary (like prying). If something doesn’t feel right about how much torque is being applied during installation–if it feels like something might break off inside–stop immediately and check with an expert before proceeding further!

Maintenance of Pillow Block Units

Pillow Block Units Maintenance
Pillow Block Units Maintenance

You should perform regular maintenance on your pillow block units. You can do this yourself or have it done by a professional, but it’s important to keep up with maintenance so that your bearings don’t fail and cause damage to other parts of your machine.

  • Frequency of lubrication: Depending on how often you use the machine and its load capacity, it may be necessary for you to lubricate the bearings every month or two months. If you are unsure about how often your bearings should be lubricated, check with an expert who has experience working with similar equipment as yours.
  • Cleaning: Pillow blocks will collect dirt over time due to their location within machinery–they’re often near moving parts like motors and gears–so they need regular cleaning as well as lubrication if they’re not already being cleaned during each maintenance session. Make sure that any debris stuck inside the housing is removed before re-installing them into place!

Common Problems with Pillow Block Units

Pillow Block Units Common Problems
Pillow Block Units Common Problems
  • Excessive noise. If you hear excessive noise coming from your pillow block unit, it’s likely that the bearings are wearing out and need to be replaced.
  • Poor alignment. If your machine is not aligned properly, this can cause premature wear on the bearings and lead to bearing failure in a short amount of time.
  • Premature wear or failure of bearings due to improper installation or maintenance practices (such as overloading).

Frequently Asked Questions (FAQs) About Pillow Block Units

Pillow Block Units FAQs
Pillow Block Units FAQs

Here are some FAQs about pillow block units and their meaning:

  1. What are pillow block units?
    Pillow block units are bearing housings that provide support for rotating shafts in heavy-duty applications. They consist of a housing and a bearing, which are mounted together to provide support and alignment for the shaft.
  2. Pillow block units meaning?
    The term “pillow block” refers to the shape of the housing, which is typically a solid piece with a flat bottom and rounded sides that resemble a pillow. The units are designed to provide a sturdy and secure mounting for the bearings that support the rotating shaft.
  3. What are the different types of pillow block units?
    There are several types of pillow block units available, including split pillow block units, flange pillow block units, and take-up pillow block units. Each type is designed for specific applications and offers unique features and benefits.
  4. What industries commonly use pillow block units?
    Pillow block units are used in a wide range of industries, including agriculture, construction, mining, and manufacturing. They are often used in heavy-duty applications where high loads and harsh operating conditions are present.
  5. How do I choose the right pillow block unit for my application?
    When selecting a pillow block unit, it is important to consider factors such as load capacity, shaft size, operating speed, and environmental conditions. Consulting with a bearing specialist or manufacturer can help ensure that you choose the right unit for your specific application.

Videos

Why Choose Total Bearings?

Pillow Block Units Supplier Manufacturer
Pillow Block Units Supplier Manufacturer

If you are looking for high-quality pillow block units for sale, look no further than Total Bearings! Choose Total Bearings for all your bearing needs and experience the difference in quality and service! Trust us to provide you with the best pillow block units that meet your requirements and exceed your expectations.

CONTACT US 

Scroll to Top