Nylon Ball Bearing banner
Nylon bearing have stiff resistance to all kinds of acetone, alkali, sodium, and other erosive medium deterioration.
They have just an extended service life that can be used in reflects the common.

Nylon Ball Bearing

Nylon bearing can often reduce the amount of maintenance required. Nylon bearings have a frame solution due to their tolerance to dirt, grit, and chemicals. Nylon bearing can save up to 25% on expenditures. They can be extremely wear resistant and have a low friction, enabling them to substitute more affordable plans in a wide range of applications.

Unless steel balls are used in conjunction with nylon races, nylon bearings do not require lubrication. Plastic bearings are made to have a low coefficient of thermal expansion throughout their lifetime. Plastic bearings last much longer than steel bearings, which could become scarred and increase the friction force.

Plastic bearings can withstand strong chemicals, sea water, and wash-down situations without factoring in the project. For plastic bearings, water can even be used as grease.

About Nylon Ball Bearing

Our company is putting nylon bearings on real IOS standers to address your specific need. The several functions that bearings are expected to perform differ depending on the type of nylon bearing used.

Nylon Ball Bearing
Nylon Ball Bearing Are Cost Effective

Nylon Ball Bearing Are Cost Effective

Nylon ball bearings are a cost-effective replacement to steel ball bearings since they do not require external lubricating, are highly resistant to corrosion and work quietly. The all-plastic elements, which are made of a tribopolymer mixture, are lightest, good corrosion resistance, and non-magnetic, and may be safely utilized in medicine and food manufacturing situations. The balls are typically made of glass, plastic, or stainless steel, and the acrylic is a mix of base plastics, solid lubricants, fibers, and filaments. All nylon ball bearings may also thoroughly tested in our cutting-edge testing facility. Use our service life calculator to quickly choose a nylon ball bearing that’s right for your purpose and estimate its projected life span.

Unique Design

Nylon ball bearing is low repair cost and do not require extra lubrication due to the polymers applied. The materials of the inlet and outlet ball bearing grooves determine the adequacy of a nylon ball bearing. Our low-friction ball bearings are manufactured of high-performance polymers with varying material qualities, allowing them to be utilised in a variety of applications while optimizing service life. Nylon ball bearing cages are carefully suited to the materials of the external and internal ball bearing racing in terms of chemical and temperature tolerance. We are also offering nylon ball bearing with balls made of glass or plastics in addition to steel balls. To create metal-free and hydro solutions, glass balls are utilized. Nylon Ball bearing extremely light weighted and noise free because they use nylon balls. Steel balls (stainless steel) are both inexpensive and temperature resistant.

Temperature Adjustment
You might have had trouble figuring out what thermal efficiency means for different types of plastic. We know the significance of thermal properties and working temperatures for nylon bearing as a manufacturer of plastic bearings. In the first place, what is the "minimum operating temperatures" for nylon? It's the temp at which moving elements like bearings work at their optimum for a set period of time. Please remember that optimum operating temperature may differ depending on whatever polymer you use for particular parts or components. Also, certain plastic fabrication companies may prescribe a different temperature than a material manufacturer. The "recommended working temperatures" listed here are predicated on our years of experience and records fabricating various types of plastic. There is a wide range of suggested operating temperature. Please keep in mind that the materials listed do not include any additives. The suggested temps differ if they incorporate fillers like glass or carbon. In the operational context below 100°C, general-purpose plastic (e.g. nylon, POM, etc.) is preferred. They could be used at greater temperatures too, although the top recommended temp for preserving their effectiveness is under 100 °C. At 100 to 200°C, high - temperature industrial plastic can be used. PTFE (Teflon) has a fire resistance temperature of 260°C, although for moving parts, 120-150°C is optimal because PTFE becomes soft and swells over 150°C.
Noise Free
The top polish of the balls and raceways of a high-quality, low-noise bearing will be superb, and the roundness of the balls and nylon ball bearing rings will be meticulously managed. Noise can be reduced by specifying a radial play that permits the bearing to function with nearly no radial play when in usage. If the rotor or housing specifications are off, the bearing can be overly tight, resulting in high noise, and insufficient shaft or habitation fullness can distort the nylon ball bearing rings, resulting in noisy bearings. A low noise lubricant is suggested in a high quality bearing because finely filtered lubricates allow the joint to operate silently due to the presence of larger fine materials.
Properties of Nylon Ball Bearing
Self-lubricating bearings made of nylon ball bearings and other non-metallic materials are becoming more popular. Their formulation has been fine-tuned over time to provide favorable bearing properties. Low friction, resistance to corrosion, ability to adapt under load, ability to perform over wide temperature variations, and high load capability are among these characteristics. Nylon ball bearing is appropriate and relevant and cost-effective, despite it having low heat ranges, high stiffness, and load restrictions than metallic bearings. Cotton fabric, silica, or other fillers are mixed with phenolic resin to form composite materials. Because of their high solubility, phenolic acids may be easily greased with a variety of fluids. In vessel prop and bearing surfaces, as well as electronic circuit, rolling-mill, and moisture bearings, they have displaced iron and wood bearings. Laminated phenolic acids are used as concrete elements and bearing elements in tiny instrumentation and clock clocks. They offer excellent hardness and high toughness, and also water, acidic, and acid resistance. With phenol bearings, some precautions must be taken. Because the heat transfer of the bearings liner is low, heat produced by bearing friction cannot easily be moved.
Classification of Nylon Ball Bearing

Classification

Types of Nylon Ball Bearing
Types of Nylon Ball Bearing

Nylon ball bearing provides a number of advantages that make them a tempting solution for many companies. Nylon ball bearings are appropriate for many sectors, even those with perfect conditions or delicate equipment, due to characteristics such as specific resistance values and electrical non-conductivity. Nylon, on the other hand, has the benefit of being able to be produced in the design of a range of other bearings.

Nylon ball bearing is highly adaptable, combines the best features of plastic parts with the unique attributes of each bearing type. Here’s a few of the several various types of plastic bearing available to businesses.

Nylon ball bearing classified in basic types

  • Single-row deep groove nylon ball bearing
  • Thrust nylon ball bearing
  • Angular contact nylon ball bearing
  • Self-aligning nylon ball bearing
  • Miniature nylon ball bearing
Single-row deep groove nylon ball bearing
Single-row deep groove nylon ball bearing

Deep groove nylon ball bearing among the most popular bearing types, owing to their capability to accommodate heavy loads and operate at high speeds. Deep groove nylon ball bearing can also handle radial and moderate axial loads, makes it a great choice for situations where pressure is exerted from both the outside (radial) and along the shafts (axial). This is especially true of the plastic version of these goods, which provides a quiet, clean bearing.

Thrust nylon ball bearing
Thrust nylon ball bearing

Thrust bearings are a form of rotating bearing that can handle axial loads. Plastic Ball thrust bearings combines the benefits of plastic bearings with the suitability for high-speed workloads and lightweight loads, making them the perfect for only certain elevated operations. A thrust nylon ball bearing is a type of rotary ball bearing that is used for pushing. They allow parts to rotate like conventional ball bearings, but they are intended to support a high axial force while doing so. Oil lubrication is not required for higher-speed purposes.

Angular contact nylon ball bearing
Angular contact nylon ball bearing

Angular nylon ball bearing is made to resist the high-speed demands of operations. These components have a contact angle that can take both radial and thrust loads, albeit thrust loads can only be delivered in one side.

Impulses are transferred from one racetrack to the other at a specified contact area in angular ball bearings. As a result, the bearings are suited for concurrent radial and axial pressures.

The axial load bearing capability improves as the conventional contacting distance increase. As a consequence, angular nylon ball bearing is best suited to withstand larger axial forces than deep groove ball bearings.

Self-aligning nylon ball bearing
Self-aligning nylon ball bearing

This nylon ball bearing is much more able to take shaft displacement errors than other alternatives because of a design allow the circle, ball, and retention to freely revolve all around bearing core. Plastic self-aligning bearings combines the capacity to survive brutal working environment and conditions with the benefits of plastic, making them an ideal match for sophisticated devices such as medical apparatus and semiconductor fabrication equipment. Our highly-engineered hybrid plastic materials for self-aligning bearings include base polymers for friction coefficient, strengthening fibres for higher stresses, and natural / synthetic for seamless, repairs operation. They are dust, grit, and chemical resilient, makes them perfect for use in liquids and soiled situations. They are also pressure, impact, and side load resistance.

Self-aligning nylon ball bearing is also 80% lightweight and slightly quieter than metal bearing. You could save 40% on total bearing cost by switching to plastic, and that you can calculate anticipated service life even before bearing is put within your equipment.

Miniature nylon ball bearing
Miniature nylon ball bearing

Miniature nylon ball bearing could be the appropriate match for your purposes if you need lower diameters and lightweight parts. Plastic miniature bearings are small, and they provide the highest performance for accuracy equipment and other purposes where larger parts are impractical.

Send Inquiry

Quick Quote
Usage of Nylon Ball Bearing

Usage of Nylon Ball Bearing

Plastic raceways and steel, acrylic, or glass balls are frequently used in the circuits.

Disposable surgical gadgets, vehicular power steering, and combined relevance systems that traditionally allowed many components are among the growing application areas for nylon ball bearing.

Nylon Ball Bearing Use in Daily Life
Daily Life
Tools for pool cleaning, tools for house cleaning, automotive cleaning are using nylon ball bearing tools. Sewing apparatus, bikes, spinning equipments, skateboards, food processors, and grinders are best fit model of nylon bearing tool.
Nylon Ball Bearing Use in Automotive
Use in Automotive
Nylon ball bearing is used for a vehicle steering column because they allowed developers to combine multiple images into a single unit. The bearings' shock load strength and tolerance to brandling further massively improved steering performance in this application.
Nylon Ball Bearing Use in Medical Field
Use in Medical Field
Nylon bearing is very good to use in medical tools. They need low lubricants. Blood pressure machines, operation theaters and other surgical tools are using nylon ball bearing.

Why nylon ball bearing is better than metal bearing?

Nylon ball bearing is highly adaptable, combines the best features of plastic parts with the unique attributes of each bearing type.  nylon ball bearing is also 80% lightweight and slightly quieter than metal bearing. You could save 40% on total bearing cost by switching to plastic, and that you can calculate anticipated service life even before bearing is put within your equipment.

What are the benefits of nylon ball bearing?
How nylon ball bearing is deferent now?

Nylon ball bearing is increasingly widely utilized, since they are half the price of metal ball bearings and are accessible much faster. The consumer also advantages from the plastic ball bearings’ small weight, minimal friction, and lack of lubrication.

What is the optimal temperature of nylon ball bearing?

In the operational context below 100°C, general-purpose plastic (e.g. nylon, POM, etc.) is preferred. They could be used at greater temperatures too, although the top recommended temp for preserving their effectiveness is under 100 °C.

At 100 to 200°C, high – temperature industrial plastic can be used. PTFE (Teflon) has a fire resistance temperature of 260°C, although for moving parts, 120-150°C is optimal because PTFE becomes soft and swells over 150°C.

What is the application and economic value of nylon ball bearings?

They are widespread used in air transport, electronics, marine, crude oil, chemical, mechanical, automobile, motorbike, metalworking, electronic parts, textiles pumping systems, medical, food industrial equipment, medical equipment, national defense and military technology, and other fields, thus establishing themselves as a new type of high-tech product material with significant social and economic value. It’s a nylon ball bearing with the outer ring sculpted out of polyacetal resin. An anti-creep ring is fitted to the bearing’s inner edge to enhance creep resistance between the internal ring internal diameter and the spindle. Making the middle ring width greater than the exterior diameter width makes the project quicker. Insert casting increases the pushing out force of the outer circle resin. The outer circle resin is made primarily of polyacetal, however it can also be made of other resins. Straight is the standard outside profile, but V groove and U groove are also existing.

What are the characteristics of nylon ball bearings?

Nylon bearing have stiff resistance to all kinds of acetone, alkali, sodium, and other erosive medium deterioration,as well as extreme heat, fatigue strength, thinnest structure weight, high restricting speed, low noise, electromagnetic shielding, directional high thermal stability, and small starting engine power, among other characteristics.

Send Your Inquiry Today
Quick Quote
Scroll to Top