Inner Bearing Puller banner
The Best Way to Pull Bearings
Inner bearing puller for fast, easy removal

Inner Bearing Puller for a quick and easy job.

Few things are as frustrating as a seized bearing. Whether it’s a wheel bearing on your car or a simple pulley on a piece of machinery, a seized bearing can bring your work to a grinding halt. Fortunately, there is an easy way to remove even the most stubborn bearings: an inner bearing puller. Inner bearing pullers work by gripping the inner race of the bearing, allowing you to apply leverage and break the seals without damaging the housing. And best of all, they’re quick and easy to use, so you can get back to work in no time. So next time you’re faced with a seized bearing, don’t waste your time trying to pry it out with a screwdriver or hammer. Grab an inner bearing puller and make short work of the job.

Get the Job Done Quickly With Our Tool

When you’re working on a project, you don’t have time to waste. You need your tools to get the job done quickly so you can move on to the next thing.

And when all your tools are as high-quality and durable as ours, you can trust them to get the job done quickly and efficiently. When we say our products are built for life, we mean it! They’re made with premium materials that will stand up to years of use, and they’re designed with innovative features that make them easier to use.

Our inner bearing puller is one such product. It’s compact, so it fits into tight spaces—like underneath your car—without taking up too much room. And it’s super easy to use: just unfold it and squeeze the handles together so that they lock into place around your axle or spindle. Then use either an Allen wrench or a socket wrench (depending on what kind of axle you have) to loosen the nut inside the bearing housing. That’s it! You’re ready for installation in no time at all!

This tool has been specially designed so that it won’t damage either the surrounding components within your vehicle or yourself while using it either which means that if something goes wrong while working with this device there won’t be any harm done either way! This means that using this tool is completely safe and worry-free so don’t hesitate to give it a try!

For a new way to save time and get things done, check out our inner bearing puller!

Get the Job Done Quickly With Our Inner Bearing Puller
Inner Bearing Puller can Pull Any Bearing in Minutes

Pull Any Bearing in Minutes

If you’ve ever had to take apart a motor or any other machine, you know it’s not an easy task. It can be a painstaking process that’s messy, time-consuming, and often frustrating.

You might think that the best way to deal with this kind of situation would be to have all of your tools with you at all times—and while that’s certainly ideal, it’s not always practical. What if your truck breaks down on a weekend getaway? You’d have to go home and find what you need. That’s no fun!

But with our product, the Inner Bearing Puller, you’ll be able to get through the job faster than ever before.

Bearing pullers are a must-have tool for any serious mechanic. They make it easy to remove bearings, which is vital when it comes time to replace a bearing.

The Inner Bearing Puller is designed specifically for pulling bearings out of their housings without damaging them or the housing itself. The tool has two ends: one that fits inside the bearing and one that fits outside the housing. You put them together and twist the handle until it pops right out! The tool is made of high-quality steel that will last for years to come and comes in handy kits with all of your favorite sizes included so you’ll always have what you need when something goes wrong on your next project!

If you’re looking for a way to make your life easier as a mechanic or engineer, then this is something worth checking out!

Buy the Best Bearing Puller Online

What you need for successful bearing removal.

Axle Bearing Puller
An axle-housing puller.
Small Bearing Puller
Assembling/disassembling a remote-control car is easy with this puller.
Gear Bearing Puller
A gear puller is a special tool designed to remove gears from shafts.
Inner Bearing Puller

This handy little tool works with any type of bearing.


An inner bearing puller is a handy tool that can be used to remove bearings from a variety of different surfaces. To start off, you need to figure out what size the bearing is that you are trying to remove. Once you have done this, you can select the appropriate size puller for the job. Next, you need to position the puller so that the jaws are lined up with the bearing. When you have accomplished this, you simply have to press hard on the handle of the puller until the bearing pops out. If it is difficult to get the bearing out, try tapping with a hammer. With a little patience and effort, you should be able to remove any bearing using an inner bearing puller.

Getting your inner bearing puller clean is important for two reasons. First, it will help to prolong the life of the tool. Second, it will ensure that the tool works as effectively as possible. Here are a few tips to help you get your inner bearing puller clean:

First, disassemble the tool and scrub all of the parts with a stiff brush. Make sure you focus extra hard on the areas that could get dirty, like the threads.

Next, rinse all of the parts with clear water and allow them to air dry completely. Once they’re dry, reassemble the tool and apply a light coat of oil to all of the moving parts.

Finally, wipe down the exterior of the tool with a damp cloth. This will remove any debris that could cause problems during operation. Follow these steps and your inner bearing puller will stay clean and in good working order.

Send Inquiry

Quick Quote
The Right Tool for the Job

Inner Bearing Puller: The Right Tool for the Job

When you need to take a bearing out of a system, there are several ways to go about it. If you’re working on a project that’s small enough, you can get away with using a hand-operated bearing puller.

However, if you’re dealing with larger systems or need to remove bearings in a more controlled manner, an inner bearing puller may be the best choice.

There are a few situations where an inner bearing puller will come in handy.

  1. When you need to remove the bearing from the wheel hub, you can use an inner bearing puller to grab onto the inner bearing and pull it out of the wheel hub.
  2. If you’re trying to remove gear from the inside of a machine and the gear is too small for your fingers, you can use an inner bearing puller to grab onto the gear and pull it out of the machine.
  3. If you’re working on an engine, and need to remove a part that’s stuck in there (such as a piston or something), but don’t have enough room with your hands or pliers to get at it, then use an inner bearing puller will help you get at it easily!

Inner Bearing pullers come in a few different varieties, but they all work in essentially the same way. There is a center shaft that goes through the bearing, and then two or more arms that grip the inside of the bearing. The arms are connected to the center shaft with either screws or springs. To use the inner bearing puller, you simply need to screw or spring the arms open so that they’re gripping the inside of the bearing, and then turn the center shaft. This will cause the arms to grip tighter on the bearing, and as you continue turning the center shaft, the bearing will be pulled out of whatever it’s seated in.

Inner Bearing Puller Precise Manufacture
Precise Manufacture
It's a top-notch product.
Inner Bearing Puller Handy Tool
Handy Tool
Allows you to get into places that other tools just can't.
Inner Bearing Puller Prevent Damage
Prevent Damage
Designed to safely pry out bearings.
Inner Bearing Puller Ergonomic Design
Ergonomic Design
Conforms to the hand and wrist, making it easier to use.

All About The Inner Bearing Puller

An inner bearing puller is a tool that’s used in vehicle repair to remove the inner bearings from a vehicle’s hub. The hub of a car is the center piece that holds all four wheels on. The bearings allow the wheels to spin smoothly.

The inner bearing puller looks like a giant set of pliers, but with a longer handle, and two jaws instead of one. You use it by putting one jaw on either side of your hub’s inner bearing and squeezing them together until they’re flush with each other. This will push the bearing out of your vehicle’s hub, so you can remove it and replace it with a new one.

If you’re confused about this tool or how to use it, please don’t hesitate to ask.

Why you would use an inner bearing puller

If you’re a mechanic, or if you’ve ever had to take apart something that has an inner bearing, you know how frustrating it can be to get those bearings out. The thing is, not everyone has access to special tools or the ability to make their own. But if you do have access to them (or if you’re willing to learn how to make them), then there are some incredible benefits that come with using an inner bearing puller.

First of all, they’re much more effective than just using your hands and brute force. You can be sure that your bearings will come out without damaging them, which means less waste and less money spent on replacing parts. They also keep your hands clean! Because there are no sharp edges, there’s no risk of getting blood or grease on your hands—which means no need for hand sanitizer either (which is always nice).

Another great reason why using an inner bearing puller is better than using other methods is because it’s safer than most other options out there—it’s easy on the hands while still being able to do its job efficiently and effectively! You don’t want anything too rough or too soft when trying to remove something from inside a machine; this tool strikes just the right balance.

Plus, they’re just plain convenient. If you need to remove bearings frequently (or if you work in an environment where there’s a lot of dust or debris), then having an inner bearing puller around can be a real lifesaver. No longer do you have to go searching for the right size socket or wrench; all you need is this one tool and you’re good to go.

How easy is it to use the inner bearing puller?

You bet! This is a question we get all the time. We know that you may be looking for the best inner bearing puller out there, but are wondering if this one is it. The good news is that we have tested it extensively in-house and have come up with an answer.

The short answer is yes, this inner bearing puller does work well. It’s just as effective as other models we’ve tried out before. But now let’s get into the details so you can see why we think so highly of this product.

First off, let me tell you about what makes this tool so effective: its design. This tool has a simple yet effective design that makes it easy to use and maintain. Anyone who knows how to use tools and has the inclination to do so can use this! The handle has been designed to fit perfectly in your hand so that you can use it comfortably while pulling out those pesky bearings from their home inside your bike or car engine block.

One thing that makes us love this tool so much is how tough it is. It has been made with high-quality materials including stainless steel and carbon steel so that it won’t break easily even under extreme pressure (we’ve tried). This means that you can use this tool over and over again without having to replace it anytime soon.

Where to buy an inner bearing puller

Inner bearing pullers are used to remove bearings from their housing. The puller fits around the inner race of the bearing, and then a lever is used to pull out the bearing from its housing.

These tools are generally made of steel or cast iron with handles that can be attached to make it easier to use. They’re also called “puller rings” because they’re shaped like rings—but they don’t get stuck on your finger!

Where can you get an inner bearing puller? TOTALBEARINGS has all of the tools that you need. You’ll find all kinds of sizes and designs at our online store. The only thing left to do is order your own TOTALBEARINGS’ inner bearing puller today!

What is an inner bearing puller?

An inner bearing puller is a tool that can be used to remove bearings from their housing. It’s often used in the automotive industry, but it’s also useful for home repairs and minor repairs on any machinery that uses bearings.

How do I use an inner bearing puller?

The first step is to find the center point of the bearing-gripping jaws. This will help ensure that you put pressure on the correct part of the bearing, which ensures that you don’t damage it or cause damage to anything else in your car by putting too much pressure on something else instead. The second step is to place the jaws over the center of one side of the bearing and slowly turn them clockwise until they’re tight enough to take up some space between themselves and the other side of the bearing (this will depend on how much pressure you need). Now you should be able to remove it from its housing without damaging anything else.

What if my car has more than one inner bearing? Can I use this tool for both of them?

Absolutely! The inner bearing puller is designed to work with multiple bearings at once if needed. Just make sure they’re all in good condition before trying to remove them.

Is this tool only for removing bearings?

No! It’s also great for installing new ones because it ensures that the races are positioned correctly so no damage is done during installation.

What does it look like?

It has two parts: a barrel that goes over the wheel hub, and a handle on top of the barrel. The barrel has a slot in it that fits around the axle; there’s also a handle on top of the barrel that can be used to turn it.

Send Your Inquiry Today
Quick Quote
Scroll to Top