• Bearing Installation Kit (2)
  • Bearing Installation Kit (4)
  • Bearing Installation Kit
  • Bearing Installation Kit
  • Bearing Installation Kit (2)
  • Bearing Installation Kit (4)
  • Bearing Installation Kit
  • Bearing Installation Kit

Bearing Installation Kit

Bearing installation tools make the process of installing bearings simple and straightforward. By providing a consistent and controlled force, they help to ensure that bearings are properly seated in their housing. These measures not only help to prevent damage to the bearings but also ensure that they will run smoothly and efficiently.

  • Our impact rings come in 36 different sizes, allowing you to mount more than 400 different bearings.
  • Helps to mount the product on the shaft, housing and blind applications.
  • The impact ring fits perfectly around the inner and outer diameter of the bearing.
  • A small diameter at the top of the sleeve makes for a more even distribution of force.
  • Impact rings and sleeves are durable, designed to last for years.
  • A sturdy, reliable connection between the impact ring and sleeve ensures that your hammer drill works reliably for years to come.
  • The impact rings are designed to withstand the force of a press.
  • Impact rings are marked with clear, easy-to-see indicators of size.
  • The tacky surface of the impact sleeve provides a great grip.
  • A nylon head on this hammer prevents damage to the surface of the components.
  • The rubber grip on this hammer gives you a solid hold.

For a complete bearing installation kit, contact TOTALBEARINGS.


Impact ring sets contain all the following:

TMFT 36 – 10/12 TMFT 36 – 15/17 TMFT 36 – 20/25
  • TMFT 36-A12/32
  • TMFT 36-A12/28
  • TMFT 36-A12/37
  • TMFT 36-A10/30
  • TMFT 36-A10/35
  • TMFT 36-A17/35
  • TMFT 36-A15/35
  • TMFT 36-A15/42
  • TMFT 36-A15/32
  • TMFT 36-A17/40
  • TMFT 36-A17/47
  • TMFT 36-B20/47
  • TMFT 36-B20/42
  • TMFT 36-B25/52
  • TMFT 36-B20/52
  • TMFT 36-B25/62
  • TMFT 36-B25/47
TMFT 36 – 30/35 TMFT 36 – 40/45 TMFT 36 – 50/55
  • TMFT 36-B30/62
  • TMFT 36-B30/55
  • TMFT 36-B35/72
  • TMFT 36-B35/62
  • TMFT 36-B35/80
  • TMFT 36-B30/72
  • TMFT 36-C40/90
  • TMFT 36-C40/80
  • TMFT 36-C40/68
  • TMFT 36-C45/75
  • TMFT 36-C45/10
  • TMFT 36-C45/85
  • TMFT 36-C50/80
  • TMFT 36-C50/11
  • TMFT 36-C55/12
  • TMFT 36-C55/10

Technical data

  • Impact rings are used in combination with bore diameters from 10 – 55 mm (0.39 – 2.1 in). The outer diameter is 26 – 120 mm (1.02 – 4.7 in).
  • Sleeves can be found in the following sizes: 18.5, 37.5, 57.5 mm (0.7, 1.5 and 2.3 in) and 25, 45 and 66 mm (1.0, 1.7 and 2.6 in).
  • It’s a hammer. It weighs 2 pounds.

Effects of Proper Mounting/Installation of Bearings

The performance of bearings, their life, and their accuracy all are dependent on the proper mounting and installation. When it comes to the installation, the bearing installation kits play an important role. Therefore, the process of mounting demands utmost attention. The below-mentioned five steps are considered the key to the successful installation of the bearings and the subsequent proper functioning.

  • Cleaning of the course appropriately and the parts connected with them
  • Actually taking a look at the aspects heading and the parts
  • Establishment of course utilizing proficient apparatuses/units
  • Post-establishment investigation
  • Lubrication if necessary

In any case, the bearings should not be cleaned with water before installation. Just the applications like high velocity activities and the direction ought to be cleaned distinctly with the manufacturing plant endorsed clean sifted oil to eliminate the counter erosion specialist. Additionally, unloading the direction preceding the installation is likewise not suggested.

Moreover, the orientation with oil ought to lube before clean. The bearing establishment technique relies upon the kind and size (sort of fit) bearing. Much of the time, the bearing is introduced within shaft so it is suggested that the internal ring should be mounted intently. For bearings with cylindrical holes, we need a suitable press to encourage them to installation correctly. Another way is to heat them this method known as small pieces. Some bearings have been tormented boring.

They can be installed directly on the shaft of the tapes and the cylinders using the tapered arm. Bearings are usually installed loosely at home. The press, then again, may be utilized assuming the external ring has impedance problems. By using dry ice to cool the pads before installation, they can be installed with interference. Since the dampness of the air consolidates on the bearing surface for this situation, the preventive treatment of rust should be applied to it. The sort and press-fit rate decides the quantity of styles expected to accurately introduce the cushions. In most cases, the press-fit will be on the rotating ring. Electric motor shaft, for example, rotates along with the rotor. As a result, the inner ring of the bearing will require a right press, while the outer ring will be line-to-line or bits.

In the successful installation of bearings, the following information is useful. Before Installation, the bearings and surroundings should not be very dirty. There might be some hazardous containment attached with hands, gloves, or bearings that severely undermined the functional life of the bearings. So it is important to get rid of them before starting the work. It is not recommended to wash the bearings as it will do more harm than good. Only the manufacturer cleaning methods should be adopted to get rid of dirt and other containments. When several bearings need to be assembled, they should not be unpacked at the same time. Only the required ones should be taken out of the package, others should remain in a safe and dry place with their packaging. The lubricant present on the bearing surface should also be left there without washing. For storage of the bearings, clean, dry, and vibration-free conditions are ideally desired. Care should be taken while handling the bearings. Do not make them fall from a certain height; if a bearing drops on the floor from a height it should not be installed. There are many particular bearing establishment packs accessible that incorporate Induction radiators, oil infusion units, and water driven nuts.

They should be utilized for the legitimate mounting and getting off of the orientation. By using the approved bearing installation kits the possibility of damage to the equipment almost remains zero. The seals should be checked if they are pre-fabricated otherwise, proper bearing installation kits must be applied for the sealing of the bearings. Seals must be intact to prevent the bearing from becoming the victim of its worst enemies like fine dust particles, dirt, moisture, and other containments.

A proper seal serves the purpose of a barrier, it stops outsiders like dust and dirt, similarly also does not allow any lubricants to fall out. The shaft will be the new home of the bearings, so before installation, they must be clean and clear from any dust. Moreover, the shaft should be of the same size as the bearing bore. The activity of course won’t be appropriate in the event that the shaft and the lodging are not in great condition. What’s more, the lodging should be cleaned also. If the bearing has a rounded corner race, it must be applied to the axis first. Bearing oil should adhere to the maker’s rules for explicit course. Temperature and tainting conditions will decide how frequently you want to apply oil.

Grease orientation are vital for keeping up with execution and bearing period of moving components. Oil apparatuses in division of moving parts, like rollers and raceways or balls, to decrease wear and contact. One of the most well-known reasons for bearing disappointment is the absence of legitimate bearing oil. It is not profitable to directly hammer the bearings, because it will produce a gap or dent into the bearing. Likewise, any wood striker must also be avoided because it will cause a serious blow, and small particles or fragments that can enter the sheath bearing will cause damage. That is why the right bearing installation bearing installation kit is needed so that the same pressure is applied to all sides of the bearing. In other words, the pressure on the bearing must be straight and square. During the bearing installation, the right treatment must be taken for safety, so the protective equipment must be worn.

Read More

We Help You Get Those Bearings Installed

Use of bearing installation kits

Types of Bearing Mounting/Installation

Bearing mounting and installation are mainly divided into two types which are subdivided further, and each method has its bearing installation kits.

  • Cold Mounting
  • Hot Mounting

Types of Bearing Removal Tools

The particularly designed bearing removal tools are also known as bearing pullers. Their manufacturing is done from special tool-grade steel. However, iron or some other alloys may also constitute the material of such tools. The bearing removal tools are made robust to ensure that they are stronger than the parts they are applying. Bearing remover tools come in many varieties with different applications. Bearing remover or bearing getting off has a few kinds which include the utilization of various instruments also. These bearing evacuation strategies incorporate,

  • Manual Dismounting/Removal
  • Dismounting/Removal by using the hydraulic tools
  • Dismounting/Removal by using the injection oil technique.
  • Dismounting/Removal by using the heat method

The most widely recognized kinds of bearing removal tool are two-and three-arm bearing pullers, or outer pullers. They range from one-to forty-ton cutoff and component a couple of jaws that are meager and fixed, allowing the completions to get successfully behind the bearing to its race.

Bearing Removal Tool

Kinds of Bearing Mounting Installation and the Relevant Bearing Installation Kits

Bearing Installation Kit
Bearing Installation Kit

The term ‘mounting’ is described as the installation of bearings on the shaft as well as on the housings. To get the performance at full potential the installation of bearings should be done carefully and with proper bearing installation kits and bearing installation kits. As explained earlier, there are two main types of installation methods that are classified further based on their bearing installation kits and applications.

There are nothing lower temperatures involved in the mounting when the term cold is used. Rather it means that the mounting or installation is done without heating. Thus, the bearings are driven mechanically. For this reason, cold mounting has three more categories.  Each is applied according to the conditions and nature of the application.

The Mechanical Method

The Mechanical Method

The following are some important bearing installation kits for installing and installing bearings mechanically. Spanner, sockets, fitting bearing installation kits, and hammer punches dead. This is a method that is very helpful for small diameter bearings with a bore cylinder that will be installed on the shaft or housing.

Drive-up method

Drive-up Method
Drive-up Method

This is a hydraulic mounting bearing method, some bearing installation kits used in this case are hydraulic nuts and pumps, spanner hooks, and key seat locks. The strength and strength of the hydraulic driven method is much higher than the mechanical method. The bearing installation kit must be used correctly to avoid damage to the surface of the shaft and bearings. The use of these improper bearing installation kits can eliminate radial permission bearings. This method is very helpful in medium to large bearings that have a tapered bore and pushed into a tapered chair.

Oil injection method

Oil Injection Method
Oil Injection Method

Installation is done easier by injecting oil to the surface. Oil forms films between the two surfaces that reduce friction resistance and the installation path to soft and smooth. This procedure has a condition that the channel and groove must exist. This placement must follow the shaft design. Besides oil, some hydraulic bearing installation kits also accompany the procedure. This method is suitable for medium to large bearings that have a tapered drill. The main principle is to inject the thin film oil between the inner ring and its seat where the bearing must be placed.

In the hot mounting, generally, heat is applied to expand the bearing. This expansion relieves the interface fits and allows the bearings to easily slide onto the other component which is mating. In the heating category, there are two different methods as well. Notwithstanding, there are a few spots where the piece of bearing isn’t uncovered so for such restricted got to places a two jaw puller will do the work furnished that it ought to be utilized with security.

Induction Heater

Induction Heater
Induction Heater

The best way to heat pads using Hot Mounts is induction heating. For induction methods, some bearing installation kits are needed for the process. Induction heaters, gloves that are resistant to heat, and yoke. The current flowing in the heating coil produces a magnetic field. Thus Eddy’s current is produced in bearings. Because of bearing material resistance, heat is produced in bearings because the flow of eddy flows. The difference between the temperature between the bearing and atmosphere is almost 90 degrees.

Electric Hot plates and heating cabinets

Electric Hot Plates and Heating Cabinets
Electric Hot Plates and Heating Cabinets

This is the easiest equipment used in the bearing installation. The preset temperature is set according to the requirements before heating bearing equipment. For heating batches, ovens and hot plate are used to heat small bearings. They are usually suitable for heating smaller bearings because they need a lot of time. Thus, for bigger bearings, it is not wise to spend a lot of time in this apparatus.

It Is Easy To Install When You Use Our Bearing Installation Tool (5)

Bearing Installation kit video

Why Choose Us?

TotalBearings is a leading provider of bearing installation kits. We make sure that your bearings are installed properly and professionally, so you can rest assured you won’t have to do it yourself again.

We’ve been in the business for years, so we know what it takes to make sure your bearings are installed properly. We’ve seen all the problems that can come up when DIYers try to install their own bearings and we want to make sure that doesn’t happen to you!

totalbearings warehouse
What are the characteristics that one should look at before mounting the bearings?

Before the mounting of the bearing, the following things must be considered. The dimensions of the housings, and the shaft must be clean and accurate. The lubricant that is applied is also clean and according to the proper specification. Some important bearing installation kits and equipment must be there to follow the procedure. Safety precautions must be considered in the use of PPEs.

At what temperature the bearing has to be heated?

The temperature of 80 to 90 degrees is considered enough for the bearings to be heated. The upper threshold of the temperature is about 125 degrees. If the heating is done beyond that level, the material may change its metallurgical property which causes variations in the diameter and hardness.

Ordinary engine bearing working temperatures range from 140° to 160°F. As in every single bearing application, this estimation ought to be taken at the bearing external ring.

Three most common types of mounted bearing?

These are join pad blocks (solid or split), flanged cartridges, round and empty cartridges, and take-up units. Most sorts of plain and rolling-component orientation are accessible in mounted units, wiping out the need to choose and collect various parts. Housed orientation give shaft backing to outspread, push, or a blend of burdens. Mounted bearing sorts incorporate pad blocks (strong or split), flanged cartridges, barrel shaped cartridges, and take-up units.

Summarize the bearing installation kits used for mounting the bearings?
Cold Mounting Hot mounting
Size of bearing Small to Medium Small, Medium, and large
Type of Seat Cylindrical tapered, adaptive sleeve, or withdrawal sleeve Cylindrical
Bearing installation kits used Fitting bearing installation kit, hook spanner, or impact spanner Hot plate induction heater, or hot oil injector.
What is a bearing installation tool?

A bearing installation tool is a device used to install bearings in a product.

Why do I need a bearing installation tool?

A bearing installation tool makes it easier to install bearings in your product, saving you time, money and effort.

Are there any benefits of using a bearing installation tool?

Yes! There are many benefits of using a bearing installation tool, including the following:

– You can complete the job faster than ever before.

– You’ll be able to save money on labor costs.

– Your employees will be able to use their time more productively since this will save them time because they won’t have to install each bearing individually.

What is the difference between a bearing installation tool and a bearing removal tool?

A bearing installation tool is used to install a bearing, while a bearing removal tool is used to remove it.

What is a safe bearing removal tool?

If we talk about safe things then you must know what a safe-bearing removal tool is. The plate or splitter separator that is not used to access areas where jaw towers may not be easy. They are great for eliminating cushions, pulleys, cog wheels, and shrubs connected to the lodging or different parts. This is the most secure towing bearing for use.

What are the three main parts of the teeth of bearing removal tool?

Work that always needs the use of towers almost always involves the maintenance of rotating machines. The most basic portions to be deleted are bearings, gears, wheels, pins, bushings, arms, screws, sprockets, and pulleys.

What kind of attraction is in bearing removal tool?

Cushioning splitter plate, towing 2 and 3 arm bearings, internal bearing towers, bar type pullers, and hammer pullers are between available towers. It is the normal functioning of a bearing removal tool.

Send Inquiry
Quick Quote
Scroll to Top