• Adapter Sleeve H322 (4)
  • Adapter Sleeve H322 (3)
  • Adapter Sleeve H322 (2)
  • Adapter Sleeve H322
  • Adapter Sleeve H322 (4)
  • Adapter Sleeve H322 (3)
  • Adapter Sleeve H322 (2)
  • Adapter Sleeve H322

Adapter Sleeve H322

Adapter sleeve H322 with KM lock nut, MB lock washer, and metric dimensions.

Adapter sleeves H322 allow bearings with tapered bores to be mounted on cylindrical seats. The KM lock nut and MB lock washer are included with the KM3 and M3 set screws.

  • Quick and easy to install
  • Finished with a lock nut
  • Equipped with a locking device

For a Adapter Sleeve H322, contact TOTALBEARINGS.

Technical Specifications


Adapter Sleeve H322
Specification of Adapter Sleeve H322
100 mm
Bore diameter
110 mm
Outside diameter small taper
145 mm
Outside diameter lock nut
77 mm
19 mm
Width lock nut
21 mm
Width lock nut including lock washer
M 110×2
External taper



No Additional Location is Necessary with Our Adapter Sleeve H322!

Application of Adapter Sleeve H322
Safety, Easy Mounting and Dismounting


An adapter sleeve is a device that is used to secure tapered roller bearings and shafts. The adapter sleeve H322 is specifically designed for use with 100mm ID bearings. It is made from high-quality steel for durability and strength. To install the adapter sleeve, first, remove the old bearing from the shaft. Next, slide the adapter sleeve over the shaft until it is seated against the shoulder. Then, press the new bearing onto the shaft until it is seated against the adapter sleeve. Finally, secure the bearing in place with retaining rings or set screws. This procedure can be used to install or replace tapered roller bearings on a variety of different types of shafts. With proper installation, an adapter sleeve can provide years of reliable service.

Improves Equipment Performance

Cleaning Tips for Adapter Sleeve H322

Adapter sleeves H322 are a handy tool that can be used to clean a variety of surfaces. However, if they are not cleaned thoroughly, they can also be a breeding ground for bacteria. Here are some tips for keeping your adapter sleeve clean and bacteria-free:

  • Clean the sleeve after each use with soap and water.
  • If you notice any buildup on the sleeve, soak it in a solution of vinegar and scrub it with warm water for 30 minutes before scrubbing with a soft brush.
  • Rinse the sleeve thoroughly with clean water after cleaning.
  • Allow the sleeve to air dry completely before storing or using it again.

By following these simple tips, you can ensure that your adapter sleeve is always clean and bacteria-free.

A Simple Way to Mount Bearings With Adapter Sleeve H322

Browse all bearings and find one that meets your exact requirements. (6)

adapter sleeve h322 video


TOTALBEARINGS offers high-quality, efficient bearing products and solutions for a variety of operating-related requirements on basis of our offerings.

We are devoted to the development and manufacturing of new bearings, with the aim to provide customers with products that meet their demands. Our goal is to become a global partner for our customers and contribute to society by promoting innovative solutions in the field of mechanical engineering.

totalbearings warehouse
What is the purpose of the Adapter Sleeve H322 for bearing?

The Adapter Sleeve H322 for the bearing is a replacement part that can be used to repair damaged or worn adapters.

What are the benefits of Adapter Sleeve H322 for Bearing?

This adapter sleeve offers an easy way to convert your deep groove ball bearings into full complement ball bearings. The housing features a shoulder that makes it suitable for use in applications that require additional support and stability.

Where can I buy Adapter Sleeve H322?

You can buy Adapter Sleeve H322 for bearing online at TOTALBEARINGS.

How do I use the Adapter Sleeve H322 for bearing?

You can use the Adapter Sleeve H322 for bearing by first placing it into the adapter sleeve and then placing your bearing inside of it.

What are some common uses for the Adapter Sleeve H322 for bearing?

The Adapter Sleeve H322 for bearing allows you to use DIN-compliant bearings in non-DIN-compliant bores, so it’s perfect if you want to upgrade your bearings but don’t want to replace parts or machines. It can also make it easier to switch between different diameters of shafts while still using the same bearing type.

Send Your Inquiry Today
Quick Quote
Scroll to Top