• Adapter Sleeve H320 (4)
  • Adapter Sleeve H320 (3)
  • Adapter Sleeve H320 (2)
  • Adapter Sleeve H320
  • Adapter Sleeve H320 (4)
  • Adapter Sleeve H320 (3)
  • Adapter Sleeve H320 (2)
  • Adapter Sleeve H320

Adapter Sleeve H320

High precision adapter sleeves H320 for 222 series bearings are now available here at TOTALBEARINGS! These top-of-the-line adapter sleeves provide superior holding power and alignment for your bearings, ensuring optimal performance and extended service life. Made from high-strength materials, our H320 adapter sleeves are designed to withstand the rigors of even the most demanding applications. And, with a wide variety of sizes available, we have the perfect solution for your bearing needs. So, if you’re looking for the best in adapter sleeve technology, look no further than our products! Our High precision adapter sleeves H320 for 222 series bearings are the perfect choice for your next application.

  • Industrial-strength positive locking method.
  • Installs easily on straight shafts without the need for additional locating devices.
  • The installation and removal is made simple by the technique and design.
  • It sets the industry standard for locknuts.

Buy Adapter Sleeve H320 from TOTALBEARINGS to ensure your bearings last a long time.

Specification

Inner Diameter(mm) 90 Outer Diameter(mm) 130
Width(mm) 71 Thread G M100x2
sleeve length B1(mm) 71 Bore diameter bearing d(mm) 100
Fuse MB20 Locknut KM20
Taper 1:12 Width nut and lock B2(mm) 19.75

Adapter Sleeve H320 for Bearing Assembly

High Precision Adapter Sleeve H320
High Quality, Efficient and Economical

H Series Adapter Sleeve H320

  • It can be mounted directly to a straight shaft or on against the step on a stepped shaft.
  • If an adapter sleeve or KM locknut is not damaged, it can be reused. However, a new lockwasher or locking plate should be used each time the corresponding locknut is installed.
  • Precision bearings and power transmission components meet ABMA, SAE, and ABEC standards. Most components are made from AISI 1000 or 1200 series steel.
  • The surface finish of bearing bores will not exceed 100 microinches for sizes 00-10, 120 microinches for sizes 11-22, and 150 microinches for sizes above 22.

Get a High Precision, Quality H320 Adapter Sleeve

Application of Adapter Sleeve H320
Application of Adapter Sleeve H320

An adapter sleeve H320 is an important tool for anyone who needs to connect two different pieces of equipment together. By creating a snug fit between the two surfaces, the adapter sleeve ensures that there is minimal movement and vibration. The setup prolongs the equipment’s life and prevents wear and tear. To use an adapter sleeve H320, make sure to choose a sleeve that is slightly larger than the diameter of the shaft. Next, apply a thin layer of lubricant to both the inside of the sleeve and the outside of the shaft. By following this step, you can help ensure that you have a smooth connection. Finally, slide the sleeve over the shaft and tighten it in place with a wrench. Using an adapter sleeve, it’s really easy to connect two pieces of equipment.

If you want your adapter sleeve H320 to last, it’s important to clean it regularly. So how should you go about it? Here are a few tips:

– First, remove any dirt or debris from the surface of the adapter sleeve with a soft cloth. Don’t scrub the surface too hard; you don’t want to damage it.

– Next, mix a solution of warm water and mild soap. Submerge the adapter sleeve in the mixture and allow it to soak for several minutes.

– Finally, rinse the adapter sleeve thoroughly with clean water. Dry completely before using it again.

By following these simple steps, you can keep your adapter sleeve looking new for years to come.

Get your adapter sleeve here! (3)

adapter sleeve h320 video

Why Choose Totalbearings for Adapter Sleeve H322?

Totalbearings has been a leading supplier of H322 adapter sleeves for decades, and we have the experience to back it up. Our sleeves are made from high-quality materials and undergo rigorous testing to ensure they’re up to snuff.

We also offer a wide range of sizes, so you can find the right sleeve for your application. Our team is dedicated to providing excellent customer service, so if you ever need help or have questions about our products, feel free to reach out!

totalbearings warehouse
Do you know what an adapter sleeve H320 is? 

Yes. An adapter sleeve H320 is a type of bearing that helps to reduce rotational friction in a rotating shaft. It does this by surrounding the shaft with a series of rolling elements (balls or rollers) that contact the shaft as it rotates. This creates a labyrinth seal between the shaft and the rolling elements, which helps to keep out contaminants and protect the bearing from wear.

Why do you think it’s important to use an adapter sleeve H320? 

There are a few reasons why an adapter sleeve H320 is important to use with a bearing. First, it helps to keep the bearing in place and keeps it from moving around. This is especially important if the bearing is subject to high speed or shock loads. Second, the adapter sleeve helps to protect the bearing from contamination and keep debris out. Finally, using an adapter sleeve can help extend the life of the bearing by absorbing some of the shocks and vibrations that can occur during operation.

What industries do you think would most benefit from using an adapter sleeve H320? 

There are a few different industries that would most benefit from using an adapter sleeve H320 bearing. One of these industries is the agricultural industry. Farmers often use equipment that requires bearings, and an adapter sleeve H320 bearing would be ideal for this type of machinery. Another industry that could make use of this type of bearing is the construction industry. Many construction projects require machinery that utilizes bearings, so an adapter sleeve H320 bearing would be beneficial in this instance as well. Lastly, the automotive industry also makes use of many types of machinery that require bearings; therefore, an adapter sleeve H320 bearing would be advantageous to have on hand for vehicles or other machines in this industry.

Is there any advice in choosing the right adapter sleeve for your needs?

In order to make sure you get a sleeve that will work for your specific device, pay attention to the following features. First, consider the size of the shaft or bore that you need to accommodate. Adapter sleeves are available in standard sizes to fit shafts ranging from 20 mm to 500 mm in diameter. Next, think about the type of mounting that you need. Some adapter sleeves can be used with both shaft-mounted and STUD-type hydraulic mounts, while others are designed for one or the other. When choosing the right sleeve for your project, take into account any special features that may be important to you, such as corrosion resistance or extreme temperature tolerance. With all of these factors in mind, you should be able to find the perfect adapter sleeve for your application.

Where can you buy an adapter sleeve H320? 

If you’re looking for an adapter sleeve H320, then your best bet will be to check out TOTALBEARINGS. They have a great selection of bearings and adapters, and they’re sure to have what you need. Plus, they offer great prices and fast shipping, so you can get your order as soon as possible.

Send Your Inquiry Today
Quick Quote
Scroll to Top